Key Takeaways

  • Mixing agricultural waste biochar into natural plant-fiber plastics greatly improves their structural strength and durability.
  • An optimal amount of biochar creates a tough barrier that significantly slows down burning and reduces heat release during fires.
  • The improved bio-composites achieve much higher resistance to physical impacts, surface indentation, and bending stress.
  • Adding waste-derived materials to plant-fiber composites offers a sustainable pathway for manufacturing safer electrical conduit pipes.
  • Optimizing filler levels prevents material clumping, ensuring that mechanical performance and fire safety reach their peak together.

In a recent publication in the journal Scientific Reports, researchers G. Velmurugan, Jasgurpreet Singh Chohan, S. A. Muhammed Abraar, K. Velusamy, D. Elil Raja, Ramya Maranan, K. Arunprasath, Arun Kumar, and Regasa Yadeta Sembeta investigated how adding sugarcane biochar influences the mechanical, thermal, and fire-resistant properties of natural plant-fiber composites. As industries increasingly seek sustainable alternatives to petroleum-based plastics, combining plant fibers like flax and kenaf with recycled agricultural waste offers an attractive engineering solution. However, natural composites traditionally suffer from high flammability and variable structural integrity when exposed to harsh environmental conditions. By testing different proportions of biochar derived from sugarcane husks, the research team evaluated how precise filler integration can simultaneously enhance structural durability and fire safety without compromising material quality.

The findings reveal a clear, composition-dependent improvement in mechanical performance when biochar is added up to a specific threshold. Specifically, composites containing 4.5 weight percent biochar achieve a tensile strength of 38.01 megapascals, representing a substantial enhancement compared to unfilled hybrid laminates. Flexural strength similarly reaches 76.12 megapascals, while impact strength climbs to 9.62 kilojoules per square meter, indicating superior energy absorption during sudden physical shocks. Furthermore, surface hardness improves significantly to 86 Shore D, and interlaminar shear strength reaches 13.24 megapascals. These enhancements stem from the rigid carbonaceous filler reinforcing the epoxy matrix and improving stress transfer between the woven flax and kenaf layers. However, increasing the biochar concentration beyond this optimal threshold to 6 weight percent leads to a noticeable decline in mechanical properties, as excessive filler particles tend to form localized clusters and microstructural defects that hinder uniform load distribution.

Thermal and fire-performance evaluations demonstrate equally striking benefits resulting from the optimized biochar incorporation. Thermogravimetric analysis reveals that the onset temperature of thermal degradation rises significantly to 317 degrees Celsius, while residual char yield increases to 28 percent at the 4.5 weight percent biochar loading. When subjected to flammability tests, the optimized composite exhibits a limiting oxygen index of 28.4 percent, making it substantially more resistant to combustion than neat epoxy or unfilled natural fiber laminates. Cone calorimeter measurements further confirm that peak heat release rates drop to 300.10 kilowatts per square meter, representing a 42 percent reduction compared to unreinforced epoxy. Total heat release values similarly decrease to 54.03 megajoules per square meter, while time to ignition increases markedly. These improvements are attributed to the formation of a dense, protective carbonaceous barrier layer during combustion that restricts heat transfer, limits oxygen diffusion, and suppresses volatile gas release.

To prove the practical feasibility of these enhanced materials, the researchers successfully fabricated a cylindrical prototype resembling an electrical conduit pipe, measuring 300 millimeters in length with a 3-millimeter wall thickness. While the prototype demonstrates that the optimized bio-composite can be successfully molded into functional tubular geometries with good dimensional stability, the authors emphasize that further testing is necessary before commercial deployment. Future investigations must evaluate electrical properties such as dielectric strength and volume resistivity, along with long-term environmental durability and standardized fire classifications. Overall, the study establishes that incorporating 4.5 weight percent sugarcane biochar into flax and kenaf hybrid composites successfully bridges the gap between mechanical strength and fire resistance, providing a solid foundation for developing sustainable bio-derived engineering materials.


Source: Velmurugan, G., Chohan, J. S., Muhammed Abraar, S. A., Velusamy, K., Elil Raja, D., Maranan, R., Arunprasath, K., Kumar, A., & Sembeta, R. Y. (2026). Development of flax/kenaf hybrid epoxy composites incorporating sugarcane biochar with enhanced fire performance for potential electrical conduit applications. Scientific Reports, 16, 80600.


Leave a Reply

Trending